Office Interiors | Interior Fit Out | Design Refurbishment | Redhill

Richaire Litimed: Office Partitionings

01737 77 11 31

sales@richaire.co.uk

Est. 1972

 

Richaire Aluminium Partition Systems

 

Richaire Aluminium Partitions utilise the industry standard designs for Aluminium partitions. They are available in many varieties. These include solid and fully or part glazed versions.

 

These partition systems are simple, economical, lightweight, non-loadbearing and quickly site assembled. They are suitable for all types of light commercial use where performance requirements are not the main criteria. This product is non-firerated.

 

The system consists of lightweight extruded Aluminium sections, in the form of vertical H posts, that run between horizontal floor and ceiling channels to form a framework. Honeycomb Plasterboards are slotted into framework. Either square or rounded corner posts can be supplied. Aluminium components are normally supplied in a Satin Anodised finish but a standard range of powder coated colour finishes are also available on request.

 

Honeycomb Plasterboards are supplied in widths of 1200mm and in lengths of 2000, 2400, 2700 and 3000mm The exterior of Richaire Aluminium Partitions may be painted in the clients choice of colour and finish, but is more normally covered with a wall vinyl, again of the clients choice.

 

Windows may be either single centre, single offset or double-glazed. Glazing is completed using snap-in PVC components in White, Black or Grey.

These partitions are rated Medium Duty and are ideal for use for office accommodation.

 

General Construction: Nominal 50mm Aluminium H posts on nominal 1200mm centres, with a 46mm Honeycomb Plasterboard fitted between the posts.

 

Glazing/Solid Options: Single glazed or double glazed panels are available in many styles. For example, Full Height glazing, Door Head Height glazing, Solid to Dado & Glazed above, Solid to Dado and glazed to Door Head and Borrowed light are commonly supplied. Glass may Laminated or Toughened up to 7mm thk

 

Sound Rating: Tested to BS EN ISO 140-3: 1995 and rated in accordance with BS EN 717-1: 1997 up to 26 Rw (dB) depending on construction.

 

Door Finishes: Hollow Core Timber doors are available in most standard wood types. Standard Doors are normally 44mm thick, 1981 mm high x 838 mm wide. Other options are also available.

 

Skirtings: Plastic.

 

Privacy: It is a legal requirement that full height glazed panels be fitted with manifestations or blinds. The extent of manifestation over the legal minimum can be used to provide privacy.

 

Integral 12mm venetian louver blinds with manual tilt only mechanisms for double glazed partitions can be supplied on request.

 

Standard 12mm venetian louver blinds for single glazed partitions can be supplied on request.